Static DHCP Reservations for Tenda

Shows the static IP list (DHCP reservations) on the Tenda LAN Settings page, even in WISP mode.

Static DHCP Reservations for Tenda brings back the static IP list (DHCP address reservation) on the LAN Settings page of Tenda routers. The Tenda web panel shows this list only in Router mode. In WISP, AP and Client+AP modes the section is hidden, even though the router still supports it. This extension adds it back, so you can give each device a fixed IP address based on its MAC address. FEATURES • Add, edit and delete static IP rules (up to 32, the router limit) • Pick a connected device from a list to fill in its name and MAC address • Checks every rule like the Tenda panel does: MAC format, name length, network, duplicates, automatic DHCP range, addresses already in use • Shows whether each device is connected and which IP address it currently has • Follows the language selected in the router panel (18 languages) • Works on any router address: enable it with one click from the extension icon HOW TO USE 1. Open your router's web panel and click the extension icon, then "Enable on this site". 2. Go to More > Network Settings > LAN Settings. 3. Use the "Static IPs" section at the bottom of the page. A new rule applies the next time the device connects to Wi-Fi. PRIVACY The extension works only between your browser and your router. It does not collect or send any data, and it runs only on the router addresses you enable. Tested on Tenda AX12 Pro (firmware V16.03.68.24). Other Tenda routers with the same web panel should work too. This is an independent project, not affiliated with or endorsed by Tenda. "Tenda" is a trademark of Shenzhen Tenda Technology Co., Ltd., used only to describe compatibility.