Overview
自动检测 RackNerd 商品库存并快速完成下单,支持总开关和下单流程测试。
RackNerd 快速下单是一款专为 RackNerd 用户设计的订单流程自动化扩展。它可以在 RackNerd 商品下单页面检测库存状态,在明确显示缺货时定时刷新页面,并在商品可订购且页面提供相应按钮时自动继续商品配置、进入结算、勾选服务条款并提交订单。扩展还提供总开关、页面状态提示和下单流程测试功能。 一、主要功能 自动检测库存: 在 RackNerd 页面检测 Out of Stock 或 Sold Out 缺货提示。 缺货自动刷新: 明确检测到缺货提示后,每 2 秒刷新一次当前页面,以重新检查库存。 自动执行下单步骤: 在支持的商品配置和结账页面中,依次点击 Continue、Checkout,勾选服务条款,并在最终订单按钮可用时点击 Complete Order。 实时状态提示: 在页面左下角显示库存检测、刷新、继续、结算和提交等当前状态。 异常停止: 检测到未登录或结账信息不完整等特定结账错误提示时,停止自动操作并显示提示。 总开关: 自动下单功能默认开启。用户可以随时在扩展弹窗中关闭或重新开启;开关状态会保存并同步到已经打开的 RackNerd 页面。关闭后,扩展不会自动刷新、点击或提交。 下单流程测试: 经用户点击并确认后,从 RackNerd 特别促销页获取一个商品 ID,并在新标签页中打开对应的下单页面,便于检查扩展的工作流程。 二、使用方法 安装扩展后,点击 Chrome 工具栏中的“RackNerd 快速下单”图标;如有需要,可以先将扩展固定到工具栏。 在弹窗中确认“自动下单”总开关的状态。该开关默认开启;如果不希望扩展执行任何自动操作,请先将其关闭。 总开关开启时,访问 RackNerd 商品下单页面。扩展会自动检测页面状态,并在左下角显示当前进度。 如果页面明确显示缺货,扩展会每 2 秒刷新页面;如果商品有货并进入支持的下单流程,扩展会自动执行继续、结算、勾选服务条款和提交订单等步骤。 如需立即停止自动操作,请再次打开扩展弹窗并关闭“自动下单”总开关。已打开页面中的自动刷新、点击和提交也会随之停止。 三、测试下单流程的方法 点击扩展弹窗中的“测试自动下单”。 扩展会从 RackNerd 特别促销页读取第一个有效商品 ID,并显示商品 ID 和测试前确认提示。此时尚未打开商品下单页。 点击“继续访问”后,扩展才会在新标签页中打开对应的下单页面;点击“取消”则不会打开。 总开关关闭时,测试功能仅打开页面,不会自动刷新、点击或提交。总开关开启时,打开的下单页面将按照正常自动化流程运行。 重要提示: 如果浏览器已经登录 RackNerd、账户结账信息完整且商品有货,开启总开关可能会自动提交真实订单,并使订单出现在用户的 RackNerd 账户后台。建议仅在未登录状态下测试;未登录时,扩展不会自动填充账户、账单或支付信息。使用自动下单前,请自行确认商品、配置、价格和服务条款。 RackNerd Quick Order is an order-flow automation extension designed specifically for RackNerd users. It detects inventory status on RackNerd product order pages, periodically refreshes pages that explicitly report that a product is out of stock, and, when a product is orderable and the relevant buttons are available, automatically proceeds through product configuration and checkout, accepts the Terms of Service, and submits the order. The extension also provides a master switch, on-page status messages, and an order-flow test feature. Key features: Automatic inventory detection: Detects Out of Stock or Sold Out messages on RackNerd pages. Automatic refresh when out of stock: Refreshes the current page every 2 seconds after an out-of-stock message is explicitly detected, so that inventory can be checked again. Automatic order steps: On supported product configuration and checkout pages, clicks Continue and Checkout, accepts the Terms of Service, and clicks Complete Order when the final order button is available. Real-time status messages: Displays the current inventory, refresh, continue, checkout, and submission status in the bottom-left corner of the page. Stop on specific checkout errors: Stops automation and displays a message when specific checkout errors are detected, such as being signed out or having incomplete checkout information. Master switch: Automatic ordering is enabled by default. Users can turn it off or on at any time from the extension popup. The setting is saved and applied to RackNerd pages that are already open. While the switch is off, the extension does not automatically refresh, click, or submit anything. Order-flow testing: After the user clicks the test button and confirms, retrieves a product ID from RackNerd's special promotions page and opens the corresponding order page in a new tab so that the user can check the extension's workflow. How to use the extension: After installation, click the “RackNerd Quick Order” icon on the Chrome toolbar. You may pin the extension to the toolbar first if necessary. Check the “Auto Order” master switch in the popup. It is enabled by default. If you do not want the extension to perform any automatic actions, turn it off first. With the master switch enabled, visit a RackNerd product order page. The extension automatically detects the page state and displays its current progress in the bottom-left corner. If the page explicitly reports that the product is out of stock, the extension refreshes it every 2 seconds. If the product is in stock and enters a supported order flow, the extension automatically proceeds, checks out, accepts the Terms of Service, and submits the order. To stop automation immediately, open the extension popup again and turn off the “Auto Order” master switch. Automatic refreshing, clicking, and submission also stop on pages that are already open. How to test the order flow: Click “Test Auto Order” in the extension popup. The extension reads the first valid product ID from RackNerd's special promotions page and displays the product ID with a confirmation prompt. The product order page has not been opened at this stage. The extension opens the corresponding order page in a new tab only after you click “Continue.” Clicking “Cancel” does not open the page. When the master switch is off, the test feature only opens the page and does not automatically refresh, click, or submit anything. When the master switch is on, the opened order page follows the normal automation flow. Important: If the browser is signed in to RackNerd, the account's checkout information is complete, and the product is in stock, enabling the master switch may automatically submit a real order and place it in the user's RackNerd account. Testing while signed out is recommended. When signed out, the extension does not automatically fill in account, billing, or payment information. Before using automatic ordering, review the product, configuration, price, and Terms of Service yourself.
0 out of 5No ratings
Details
- Version1.0.0
- UpdatedNovember 19, 2026
- Size61.06KiB
- Languages中文(中国)
- DeveloperWebsite
Email
extension@mail.somewigs.com - Non-traderThis developer has not identified itself as a trader. For consumers in the European Union, please note that consumer rights do not apply to contracts between you and this developer.
Privacy
This developer declares that your data is
- Not being sold to third parties, outside of the approved use cases
- Not being used or transferred for purposes that are unrelated to the item's core functionality
- Not being used or transferred to determine creditworthiness or for lending purposes