365Dispatch Relay Connector

Reads Amazon Relay Trips for your 365dispatch bot and asks Relay Assistant for load status. The negotiator chats; you press Book.

365Dispatch Relay Connector links Amazon Relay to 365dispatch: the Updater's job, done by a bot, for dispatching companies that book on Relay. Book the load. The bot does the rest. 🚚 ━━━━━━━━━━━━━━━━━━━━ ⚡ THE MOMENT A LOAD IS BOOKED ━━━━━━━━━━━━━━━━━━━━ Keep Relay open in Chrome. The connector passes every booked load to your 365dispatch workspace, and the bot: 📄 sends the rate con to the driver's Telegram group, with the trailer number in its own message, ready to copy 📊 writes the load row on your Google Sheet and keeps STATUS, READY TIME and LOCATION current on your UPDATE BOARD ⏰ counts down to every check-in in your master group, and flags a late one once, clearly 🔴 🕑 asks the driver for their ETA and when they will be ready, and writes the ready time on the board ❌ tells the driver and your staff when Relay changes, reassigns or cancels a load, and writes the compensation on the board 💰 fills your GROSS tab with every delivered load, and sends a Sunday summary of each truck against its target 🗺️ answers /load with where the truck is right now and whether it is early or late 📦 checks a load's loading status and trailer with Relay Assistant after booking, and whenever you ask 🚆 reminds you to call the ROC on rail loads It works with your own sheet: the bot learns your columns and your status words, and shows you what it would write before it writes anything. ━━━━━━━━━━━━━━━━━━━━ 💬 THE NEGOTIATOR, INSIDE RELAY ASSISTANT ━━━━━━━━━━━━━━━━━━━━ Free with every Updater plan. Without one, a 30-day free trial, then you can buy it on its own. 🟩 On the Load Board, AI-broker loads get a green edge, and a raised price shows how much it went up since you last looked. 💬 Open Relay Assistant on a load and the Negotiator sits at the top of the chat: Listed, Offer and the broker's max. ✍️ Manual: it writes each ask, with a reason, in Relay's message box. Edit it if you like and send it yourself. ⏱️ Auto: it sends the next ask after a short countdown, with Send now and Stop. ✋ The closing ask always waits for you, even on Auto. ✅ You press Book. The connector never books a load, and Relay Assistant's own words never count as a booking. Switch it off in the connector's popup and the chat is exactly as Relay made it. ━━━━━━━━━━━━━━━━━━━━ 🔍 WHAT IT READS ━━━━━━━━━━━━━━━━━━━━ • The Trips data your Relay page already loads: trips, stops, times, rate, trailer, tractor and the assigned driver's name, plus the notes on a leg (such as the ROC's answers on rail loads) • The carrier's company name and the Driver Roster (name and Relay ID only) • While a load is in transit: the truck's last position and the arrival times at each stop, from the same service Relay's Trips map uses • When the bot asks: a load's loading status, the trailer's position and the status of each stop, from Relay Assistant • With the Negotiator on: the Load Board's cards and the messages in Relay Assistant's chat for that load 🔒 Phone numbers and e-mail addresses are removed inside your browser before anything is sent. Relay's sign-in token never leaves your browser. ━━━━━━━━━━━━━━━━━━━━ 🚫 WHAT IT NEVER DOES ━━━━━━━━━━━━━━━━━━━━ • It never books, accepts, assigns, rejects, cancels or edits a load in Relay, and never presses Book. • To read Trips, the only buttons it presses are the page's own "In Transit", "Upcoming" and "History" tabs, in a Trips tab of its own with a cover over it, the same as a person refreshing the list. • To check a load's status, it sends Relay Assistant the one question "load status" in a session of its own, so your own chat for that load stays as it was. • It writes in Relay Assistant's message box and sends messages only when the Negotiator is on. 📤 It sends data only to your own 365dispatch workspace (app.365dispatch.org). Nothing is sold or used for ads. ━━━━━━━━━━━━━━━━━━━━ 🛠️ SET IT UP IN A FEW MINUTES ━━━━━━━━━━━━━━━━━━━━ 1️⃣ Start your 365dispatch workspace on Telegram: https://t.me/org365dispatch_bot (5 days free) 2️⃣ Install the connector in the Chrome profile you use for Relay. 3️⃣ Send /extension to the bot, open the connector and enter the pairing code. 4️⃣ Keep Relay open. The popup shows which carrier account it reads and when it last sent, and the green 365 chip in Relay's top bar shows it is working. 👥 Several computers can run it for the same Relay account. One reads at a time, and another takes over if it goes quiet. ━━━━━━━━━━━━━━━━━━━━ WHO IT IS FOR ━━━━━━━━━━━━━━━━━━━━ Dispatching companies that work Amazon Relay for their carriers and use 365dispatch. Without a 365dispatch workspace the connector does nothing. 🌐 https://365dispatch.org 💬 Questions: https://t.me/sukke_lyf 365dispatch is independent and is not affiliated with, endorsed by or sponsored by Amazon. Amazon Relay is a trademark of Amazon.com, Inc. or its affiliates.